- Black double sitting.
- Size: 45*96cm (single).
- Weight: 724g.
- Material: Knitted fabric + Sponge polyester + Sponge.
- Voltage: 12V.
- Power: LO: 30W HI: 38W.
- Line length: 120cm.
- Temperature range: 45 ° C - 65 ° C.
- Applicable: Inside the car.
INSTRUCTIONS FOR USE:
1) After receiving the goods, first install the heating cushion on the seat, tie the elastic for band of the backrest, and hook the hooks so that there is no obvious displacement. If the shift is not fixed, it is easy to wear the heating wire inside the seat cushion, resulting in no heat. The heating cushion should be placed above all the seat covers, and it should be in direct contact with the human body. Do not place other items on the heating cushion.
2) Before using the heating cushion, check whether the iron pieces on both sides of the cigarette lighter plug are normal. If it is obvious flat pressure, then the iron piece should be slightly curved before it can be inserted into the cigarette lighter. Remember! Because if the iron piece is not inserted after the flat pressure is inserted into the cigarette lighter mouth, the cigarette lighter plug will not be in good contact, resulting in heat, causing the plug to melt and melt, causing the seat cushion to be unusable.
3) Check well, after inserting the plug into the cigarette lighter mouth, the person must sit on the heating pad, and then switch the switch to the high-grade [HI file], wait for 2-3 minutes to heat up the temperature, then switch the switch To the low-end [LO file], if it has been playing high-grade, it will automatically control the temperature to a certain temperature of about 65 degrees, no longer heating up, less than 45 degrees, and will restart the heating.
4) Do not use the heating pad for more than 30 minutes before starting the car. If you do not use the heating pad when you get off the vehicle, please turn off the switch and pull out the cigarette lighter plug.